Very best 5 Ways to Understand Submersible Water Pumps together with Electricity.

Despite their ground-ready, durable and insulated construction, submersible water pumps still present severe hazards for homeowners and shouldn't be used in ponds created for swimming or human immersion. The issue is simple: electricity and water do not mix. Therefore, installing a power submersible water pump for water gardens, natural ponds, or pools requires great skill and experience to avoid electrocution.

Manufacturers design submersible pumps to be safe. As an example, they encase them in cast-iron housing made to isolate the electrical and working elements of the unit. All cables are shielded and sealed by standard rubber. However, both casing and the rubber shielding doesn't guarantee that the submersible water pump will never have any contact with water.

Water Seals
The rubber water seals on a submersible pump contain no adhesive. Instead, they form the seal because of crimping method that tightens components within the pump. The seal insulates the interior of the pump from water, humidity, and outside air.

While this produces a advanced level of insulation, occasional seal failures can occur. A small malfunction brings the interior of the pump into contact with the water garden or natural pond water. Caused by this malfunction could be electrified water in the pond Order online.

The Cables
Like the primary elements of the pump, manufacturers visit great lengths to properly seal the cables. As an example, they'll fill gaps with epoxy to prevent water from invading the unit. Additionally they wrap the cables in a neoprene, that is both air and watertight.

Epoxy is incredibly capable of forming a waterproof seal. This seal won't fail unless it's afflicted by some kind of impact that would lead it to crack. If the seal cracks, water may get to the cable. The same is true for neoprene.

Regular Outlets vs. GFCI Receptacles
Both National Electric Code (NEC) and OSHA require that homes now contain GFCI receptacles in areas where water exists or potentially exists. These areas include bathrooms, kitchens, utility rooms, garages, and anywhere outside. GFCI receptacles prevent electrocution by cutting off the ability source when a silly increase or “leakage” in power, like that caused when water has contact with electricity, is detected.

Unfortunately, many older homes do not have GFCI receptacles. Consequently, plugging a power water pump into a regular outlet will make it at risk of a power surge. Additionally, it may increase the danger of electric shock. Therefore, if you use a power pump, you should ensure that you plug it into a GFCI receptacle or replace your old outlet.

Freezing Temperatures Throughout the Winter
During the winter, it's advisable to remove the water pump from your water garden or natural pond. Winters in Illinois produce frigid temperatures that could plummet below zero. Consequently, the water in an all-natural pond or water garden may stay frozen through the season.

Frozen water can take its toll on a submersible water pump. Just one single freeze can cause the casing or the cabling to crack open, exposing the electrical parts. You may not notice the cracks due to the multilayers of the casing. Therefore, when you switch on the pump in the springtime, you may be at risk of electric shock.

Abrasives and Heavy Objects
Since most basic ponds or water gardens contain rocks, plants, sand, and other objects, it is essential to ensure they cannot come into contact with the water pump.

When placing your pump, make sure you isolate it from any heavy rocks, sharp objects, or metal objects. Also, if you use sand, position the pump so that it is filtering minimal quantity of sand possible. Since sand is abrasive, it may harm the inner elements of the pump over time.

Never swim or wade in a lake with a Submersible Water Pump
You need to never swim or wade in a lake or pool with a submersible water pump. Although these pumps were created with many safety features, it's not worth the risk. There are special pumps created for swimming pools and ponds that do not carry this risk. If you want to enter your pond or pools with a submersible water pump to retrieve something or perform routine maintenance it is important that you switch off the electricity to the submersible pump and enter with caution. 

Need Assistance with Your Water Garden? Contact Us Today!
If you should be planning to construct your water garden project, then Reflections can help. We give you a wide range of features and options to help you create the perfect serene water garden for your backyard.